What's wrong with the electric heater not heating up? Analysis of popular issues on the Internet in the past 10 days
With the recent cold wave, electric heaters have become the main equipment for home heating, but many users have reported that electric heaters are not hot. This article combines the hot discussions and technical analysis of the entire network in the past 10 days to summarize common causes and solutions to help you quickly troubleshoot.
1. Common reasons why electric heaters are not hot
| Cause classification | Specific performance | Proportion (discussion data of the entire network) |
|---|---|---|
| power problem | Loose plug, insufficient voltage, faulty socket | 35% |
| Equipment failure | The heating element is damaged and the thermostat fails. | 28% |
| Improper use | Wrong gear setting, covering obstructions | 22% |
| environmental factors | The room is too large and has poor sealing | 15% |
2. Detailed solutions
1. Troubleshooting power problems
If the electric heater does not start at all, check the power supply first:
2. Equipment troubleshooting
| Fault type | Solution |
|---|---|
| Heating wire broken | Requires professional repair or component replacement |
| Thermostat failure | Reset the temperature control button or replace the module |
| Fan failure (convection type) | Clean the dust or repair the motor |
3. Precautions for use
According to feedback from netizens, the following operations can easily lead to lack of heat:
3. Comparison of characteristics of different electric heater types
| Type | Common reasons for lack of heat | Recommended maintenance intervals |
|---|---|---|
| little sun | Reflector oxidation and lamp aging | Check every six months |
| Youting | Insufficient thermal oil and deformation of blades | Before the season changes every year |
| Heater | The filter is clogged and the bearings are short of oil. | monthly cleaning |
4. Users’ high-frequency questions and answers
Q: When the electric heater is turned on, the light comes on but it does not generate heat?
A: It may be that the heating element is broken or the relay is faulty, and the machine needs to be disassembled for inspection.
Q: Does the newly purchased electric heater have insufficient heat?
A: Check whether the "low power mode" is set by mistake, or the room area exceeds the nominal value of the device (generally 100W power per square meter is required).
5. Safety warning
Be sure to disconnect the power supply during maintenance and avoid disassembling high-voltage components by yourself. If the problem persists, it is recommended to contact the official after-sales service. According to data from the General Administration of Quality Supervision, Inspection and Quarantine, about 12% of heating equipment fires are caused by illegal maintenance.
Through the above analysis, most problems of electric heater not heating can be solved by themselves. If the fault still cannot be rectified, it is recommended to keep the proof of purchase to apply for warranty service.
check the details
check the details
en
